#define MSPFSingleOutputPWM ( _port,
_i2caddr,
_channel,
_out,
_func,
_result   )     __MSPFSingleOutput(_port, _i2caddr, _channel, _out, _func, FALSE, _result)

MSPFSingleOutputPWM function.

Control the speed of a single output on a Power Function receiver set to the specified channel using the mindsensors NRLink device. Select the desired output using PF_OUT_A or PF_OUT_B. Valid functions are PF_PWM_FLOAT, PF_PWM_FWD1, PF_PWM_FWD2, PF_PWM_FWD3, PF_PWM_FWD4, PF_PWM_FWD5, PF_PWM_FWD6, PF_PWM_FWD7, PF_PWM_BRAKE, PF_PWM_REV7, PF_PWM_REV6, PF_PWM_REV5, PF_PWM_REV4, PF_PWM_REV3, PF_PWM_REV2, and PF_PWM_REV1. Valid channels are PF_CHANNEL_1 through PF_CHANNEL_4. The port must be configured as a Lowspeed port before using this function.

Parameters:
_port The sensor port. See NBC Input port constants.
_i2caddr The sensor I2C address. See sensor documentation for this value.
_channel The Power Function channel. See Power Function channel constants.
_out The Power Function output. See Power Function output constants.
_func The Power Function PWM function. See Power Function PWM option constants.
_result The function call result. NO_ERR or Communications specific errors.

Generated by  doxygen 1.6.2