#define ACCLNxCalibrateXEnd ( _port,
_i2caddr,
_result   )     __I2CSendCmd(_port, _i2caddr, ACCL_CMD_X_CAL_END, _result)

Stop calibrating ACCL-Nx X-axis.

Stop calibrating the mindsensors ACCL-Nx sensor X-axis. The port must be configured as a Lowspeed port before using this function.

Parameters:
_port The sensor port. See NBC Input port constants.
_i2caddr The sensor I2C address. See sensor documentation for this value.
_result The function call result.

Generated by  doxygen 1.6.2